Monday, December 13, 2010

Magnetic levitation & Maglev


Magnetic levitation



Magnetic levitation, maglev, or magnetic suspension is a method by which an object is suspended with no support other than magnetic fields. Magnetic pressure is used to counteract the effects of the gravitational and any other accelerations.

Earnshaw's theorem proves that using only static ferromagnetism it is impossible to stably levitate against gravity, but servomechanisms, the use of diamagnetic materials, superconduction, or systems involving eddy currents permit this to occur.

In some cases the lifting force is provided by magnetic levitation, but there is a mechanical support bearing little load that provides stability. This is termed pseudo-levitation.

Magnetic levitation is used for maglev trains, magnetic bearings and for product display purposes


Stability

Static stability means that any small displacement away

from a stable equilibrium causes a net force to push it back to the equilibrium point.
Earnshaw's theorem proved conclusively that it is not possible to levitate stably using only static, macroscopic, paramagnetic fields. The forces acting on any paramagnetic obje

ct in any combination of gravitational, electrostatic, and magnetostatic fields will make the object's position unstable along at least one axis, and can be unstable along all axes. However,

several possibilities exist to make levitation viable, for example, the use of electronic stabilization or diamagnetic materials (since relative magnetic permeability is less than one[2]); it can be shown that diamagnetic materials are stable along at least one axis, and can be stable along all axes. Conductors can have a relative permeability to alternating magnetic fields of below one, so some configurations using simple AC driven electromagnets are self stable.
Dynamic stability occurs when the levitation system is able to damp out any vibration-like motion that may occur
.




Stability methods

For successful levitation and control of all 6 axes (3 spatial and 3 rotational) a combination of permanent magnets and electromagnets or diamagnets or superconductors as well as attractive and repulsive fields can be used. From Earnshaw's theorem at least one stable axis must be present for the system to levitate successfully, but the other axes can be stabilised using ferromagnetism.
The primary ones used in maglev trains are servo-stabilized electromagnetic suspension (EMS), electrodynamic suspension (EDS), and experimentally, Inductrack.




Watch this video to understand more


You Tube


----------------------------------------------------------------------------



Maglev . transport

Maglev (derived from magnetic levitation), is a system
of transportation that suspends,
guides and propels vehicles, predominantly trains, using magnetic levitation from a very large number of magnets for lift and propulsion. This method has the potential to be faster, quieter and smoother than wheeled mass transit systems. The power needed for levitation is usually not a particularly large percentage of the overall consumption; most of the power used is needed to overcome air drag, as with any other high speed train. The highest recorded speed of a Maglev train is 581 kilometres per hour (361 mph), achieved in Japan in 2003, 6 kilometres per hour (3.7 mph) faster than the conventional speed record TGV .


Watch video on You Tube to understand more

chick here


For more information download PowerPoint file

4shared


Sunday, December 12, 2010

Group good student

Group good student

Section:12.07

Consists of:

1_ ALZUBAIR MOHAMMED MUBARAK ABDULLA AL BALOUSHI


2_ ABDULLA SAEED HADI BUTI DEMAITHAN AL SHAMISI


3_ HAITHAM ALI SAEED MUBARAK AL SHAMISI


4_ KHALED SAIF ALI KHAMIS OBAID AL DHAHERI


5_ ABDUL AZIZ MOHAMMED ABDULLA KHALFAN AL SUBHI